Specifications we offer incubator, bod incubator, co2 incubator, bacteriological incubator, egg incubator, electric incubator, lab incubator
INCUBATOR BACTERIOLOGICAL Standard double wall fabrication. Inner chamber made out of richly anodized aluminum or highly polished stainless steel and out of thick mild sheet finished in white stoving paint or mat finished pastel color combinations. The gap is filled with special glass wool for temp. Insulation. Double wall door with double glass window for observation in the chamber. Temperature range 5o C above to 80o c +-2o C controlled by a thermostat. L-shaped thermometer is provided for taking temp. Reading. Panel is provided with pilot lamps for mains & heaters, on-off switch, tamp. Control knob etc. the equipment is workable on 220 V AC 50 Hz single phase. Heating is achieved from 3 sides. Perforated removable shelves also provided.
Model no. | Chamber size in mm |
S.S.101 | 300x300x300 |
S.S.102 | 350x350x350 |
S.S.103 | 400x400x400 |
S.S.104 | 450x450x450 |
S.S.105 | 600x450x450 |
S.S.106 | 600x600x600 |
S.S.107 | 900x600x450 |
S.S.108 | 900x900x900 |
INCUBATR B.O.D.(BIO-CHEMICAL-OXYGEN DEMAND) Designed for low temperature incubation and routine determination of bio-chemical oxygen demand. Double wall construction. Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Exterior made out of thick mild steel sheet duly finished in white storving enamel paint or paste mat finishing color combinations. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clear acrylic sheet allowing inspection of material in the chamber without distributing the chamber temperature. Door operated inner illumination has been provided. The gap between wall of equipments are filled with glass wool for temp. Insulation. The cabinet is mounted on castors. Temperature is controlled by a sensitive thermostat from 5o C to 50o C +- 1o C. for lower temperature. Working a standard cooling unit with a sealed compressor with protective device has been provided below the chamber for safe and efficient working. Heating arrangement has been made within the chamber for higher temp. Working the temp. can be regulated within the range by means of a high precision double action thermo-regulator. Inner air circulating system is provided to achieve uniform temperature in the whole chamber. A control panel is provided with various indicators, on-off switch, L shaped thermometer. Supplied with cord and plug etc. the equipments is workable on 220 V AC 50 Hz single phase.
Model no. | Inner chamber size in mm | Capacity |
S.S.101 | 610x455x410 | 4.0cft |
S.S.102 | 825x500x415 | 6.1cft |
S.S.103 | 865x565x565 | 10.0cft |
S.S.104 | 900x650x575 | 12.0cft |
Contact us if you need more details on bacteriological incubator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about lab incubator、electrical thermostat incubator. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Laboratory Equipment > Other Laboratory Equipment